Bitcoin Mining Hardware - Bitcoin Miner - I mine for ...

Bitcoin (BTC) ASIC manufacturer, MicroBT recently revealed its next-generation mining hardware at a virtual launch event on April 17. MicroBT’s forthcoming M30 series of Bitcoin miners, the MS30S++ and the MS30S+, boasts a hash rate of 100 terahashes per second (TH/s).

submitted by Tokenncoin to Tokenncoin [link] [comments]

Mining hardware • 276,5 th/s bitcoin miner

submitted by btcforumbot to BtcForum [link] [comments]

Bitcoin network just made two new all-time highs: difficulty and mining hash rate

Bitcoin network just made two new all-time highs: difficulty and mining hash rate submitted by coinsmash1 to CryptoCurrency [link] [comments]

First time miner using S9.

Edit: Thanks for all the discussion and support! I truly believe in bitcoin and the fact that I now have .0302 make a me happy 😁
I have made a total of .0002 bitcoin in ~36hrs using btc.com pool. Hash rate avg 14th/s.
I honestly thought it would have better btc revenue than ~$1/Day not including power consumption. Am I doing something wrong?
I also noticed other coins produce higher mining returns should I be mining alt coins with S9? Any suggestions?
Thanks!
submitted by smubear to BitcoinMining [link] [comments]

Why i’m bullish on Zilliqa (long read)

Edit: TL;DR added in the comments
 
Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analyzed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk-reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralized and scalable in my opinion.
 
Below I post my analysis of why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise, just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction
 
The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since the end of January 2019 with daily transaction rates growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralized and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. The maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realized early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralized, secure, and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in the amount of nodes. More nodes = higher transaction throughput and increased decentralization. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue dissecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour, no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts, etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as: “A peer-to-peer, append-only datastore that uses consensus to synchronize cryptographically-secure data”.
 
Next, he states that: "blockchains are fundamentally systems for managing valid state transitions”. For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber, and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa, this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network, etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever-changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralized and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimization on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and the University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (66%) double-spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT, etc. Another thing we haven’t looked at yet is the amount of decentralization.
 
Decentralisation
 
Currently, there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so-called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralized nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics, you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching its transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end-users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public. They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public-facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers. The 5% block rewards with an annual yield of 10.03% translate to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non-custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS; shard nodes and seed nodes becoming more decentralized too, Zilliqa qualifies for the label of decentralized in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. The faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time-stamped so you’ll start right away with a platform introduction, roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalized: programming languages can be divided into being ‘object-oriented’ or ‘functional’. Here is an ELI5 given by software development academy: * “all programs have two basic components, data – what the program knows – and behavior – what the program can do with that data. So object-oriented programming states that combining data and related behaviors in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behavior are different things and should be separated to ensure their clarity.” *
 
Scilla is on the functional side and shares similarities with OCaml: OCaml is a general-purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognized by academics and won a so-called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise, it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts, it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa or Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue: In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships
 
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organizations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggests that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already take advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, Airbnb, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are built on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human-readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They don't just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data, it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community-run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non-custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiative (correct me if I’m wrong though). This suggests in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real-time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding of what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures, Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

I'm trying to do the math on mining.

Given 100% of miners using the same miner, I tried to calculate the profitability of bitcoin mining. but the results seem off. I'm wondering where I went wrong.
"current terahashes (Th/s)" Mining Unit "mining non-current rate($/Th)" "mining non-current rate $/Th)" "Mining Efficiency (J/Th)" "Energy Requirments (J)" "Energy Requirements per Block (kWh) [0.000000277778 J/kWh]" "electric costs ($/kWh)" "current electrical cost to mine 1 block ($)"
8000000 Antminer T19; 84 Th/s; 37.5 J/Th; $1749; $20.82 $384,219.55 37.5 180000000000 50,000.04 0.0715 $3,575.00
current bitcoin reward current bitcoin price current block worth daily block rewards
6.25 9133 $57,081.25 $1,369,950.00
current profit ratio (%)
1596.48%

edit:

"current terahashes (Th/s)" Mining Unit "mining non-current rate($/Th)" "mining non-current rate $/Th)" "Mining Efficiency (J/Th)" "Energy Requirments (J)" "Energy Requirements per Block (kWh) [0.000000277778 J/kWh]" "electric costs ($/kWh)" "current electrical cost to mine 1 block ($)"
8000000 Antminer T19; 84 Th/s; 37.5 J/Th; $1749; $20.82 $5,859,348.20 37.5 2745000000000 762,500.61 0.0715 $54,518.79
current bitcoin reward current bitcoin price current block worth daily block rewards
6.25 9118 $56,987.50 $1,367,700.00
current profit ratio (%)
104.53%
submitted by qwer1234123412341234 to BitcoinBeginners [link] [comments]

Filecoin | Development Status and Mining Progress

Author: Gamals Ahmed, CoinEx Business Ambassador
https://preview.redd.it/5bqakdqgl3g51.jpg?width=865&format=pjpg&auto=webp&s=b709794863977eb6554e3919b9e00ca750e3e704
A decentralized storage network that transforms cloud storage into an account market. Miners obtain the integrity of the original protocol by providing data storage and / or retrieval. On the contrary, customers pay miners to store or distribute data and retrieve it.
Filecoin announced, that there will be more delays before its main network is officially launched.
Filecoin developers postponed the release date of their main network to late July to late August 2020.
As mentioned in a recent announcement, the Filecoin team said that the initiative completed the first round of the internal protocol security audit. Platform developers claim that the results of the review showed that they need to make several changes to the protocol’s code base before performing the second stage of the software testing process.
Created by Protocol Labs, Filecoin was developed using File System (IPFS), which is a peer-to-peer data storage network. Filecoin will allow users to trade storage space in an open and decentralized market.
Filecoin developers implemented one of the largest cryptocurrency sales in 2017. They have privately obtained over $ 200 million from professional or accredited investors, including many institutional investors.
The main network was slated to launch last month, but in February 2020, the Philly Queen development team delayed the release of the main network between July 15 and July 17, 2020.
They claimed that the outbreak of the Coronavirus (COVID-19) in China was the main cause of the delay. The developers now say that they need more time to solve the problems found during a recent codecase audit.
The Filecoin team noted the following:
“We have drafted a number of protocol changes to ensure that building our major network launch is safe and economically sound.” The project developers will add them to two different implementations of Filecoin (Lotus and go-filecoin) in the coming weeks.
Filecoin developers conducted a survey to allow platform community members to cast their votes on three different launch dates for Testnet Phase 2 and mainnet.
The team reported that the community gave their votes. Based on the vote results, the Filecoin team announced a “conservative” estimate that the second phase of the network test should begin by May 11, 2020. The main Filecoin network may be launched sometime between July 20 and August 21, 2020.
The updates to the project can be found on the Filecoin Road Map.
Filecoin developers stated:
“This option will make us get the most important protocol changes first, and then implement the rest as protocol updates during testnet.” Filecoin is back down from the final test stage.
Another filecoin decentralized storage network provider launched its catalytic test network, the final stage of the storage network test that supports the blockchain.
In a blog post on her website, Filecoin said she will postpone the last test round until August. The company also announced a calibration period from July 20 to August 3 to allow miners to test their mining settings and get an idea of how competition conditions affected their rewards.
Filecoin had announced earlier last month that the catalytic testnet test would precede its flagship launch. The delay in the final test also means that the company has returned the main launch window between August 31 and September 21.
Despite the lack of clear incentives for miners and multiple delays, Filecoin has succeeded in attracting huge interest, especially in China. Investors remained highly speculating on the network’s mining hardware and its premium price.
Mining in Filecoin
In most blockchain protocols, “miners” are network participants who do the work necessary to promote and maintain the blockchain. To provide these services, miners are compensated in the original cryptocurrency.
Mining in Filecoin works completely differently — instead of contributing to computational power, miners contribute storage capacity to use for dealing with customers looking to store data.
Filecoin will contain several types of miners:
Storage miners responsible for storing files and data on the network. Miners retrieval, responsible for providing quick tubes for file recovery. Miners repair to be carried out.
Storage miners are the heart of the network. They earn Filecoin by storing data for clients, and computerizing cipher directories to check storage over time. The probability of earning the reward reward and transaction fees is proportional to the amount of storage that the Miner contributes to the Filecoin network, not the hash power.
Retriever miners are the veins of the network. They earn Filecoin by winning bids and mining fees for a specific file, which is determined by the market value of the said file size. Miners bandwidth and recovery / initial transaction response time will determine its ability to close recovery deals on the network.
The maximum bandwidth of the recovery miners will determine the total amount of deals that it can enter into.
In the current implementation, the focus is mostly on storage miners, who sell storage capacity for FIL.

Hardware recommendations

The current system specifications recommended for running the miner are:
Compared to the hardware requirements for running a validity checker, these standards are much higher — although they definitely deserve it. Since these will not increase in the presumed future, the money spent on Filecoin mining hardware will provide users with many years of reliable service, and they pay themselves many times. Think of investing as a small business for cloud storage. To launch a model on the current data hosting model, it will cost millions of dollars in infrastructure and logistics to get started. With Filecoin, you can do the same for a few thousand dollars.
Proceed to mining
Deals are the primary function of the Filecoin network, and it represents an agreement between a client and miners for a “storage” contract.
Once the customer decides to have a miner to store based on the available capacity, duration and price required, he secures sufficient funds in a linked portfolio to cover the total cost of the deal. The deal is then published once the mine accepts the storage agreement. By default, all Filecoin miners are set to automatically accept any deal that meets their criteria, although this can be disabled for miners who prefer to organize their deals manually.
After the deal is published, the customer prepares the data for storage and then transfers it to the miner. Upon receiving all the data, the miner fills in the data in a sector, closes it, and begins to provide proofs to the chain. Once the first confirmation is obtained, the customer can make sure the data is stored correctly, and the deal has officially started.
Throughout the deal, the miner provides continuous proofs to the chain. Clients gradually pay with money they previously closed. If there is missing or late evidence, the miner is punished. More information about this can be found in the Runtime, Cut and Penalties section of this page.
At Filecoin, miners earn two different types of rewards for their efforts: storage fees and reward prevention.
Storage fees are the fees that customers pay regularly after reaching a deal, in exchange for storing data. This fee is automatically deposited into the withdrawal portfolio associated with miners while they continue to perform their duties over time, and is locked for a short period upon receipt.
Block rewards are large sums given to miners calculated on a new block. Unlike storage fees, these rewards do not come from a linked customer; Instead, the new FIL “prints” the network as an inflationary and incentive measure for miners to develop the chain. All active miners on the network have a chance to get a block bonus, their chance to be directly proportional to the amount of storage space that is currently being contributed to the network.
Duration of operation, cutting and penalties
“Slashing” is a feature found in most blockchain protocols, and is used to punish miners who fail to provide reliable uptime or act maliciously against the network.
In Filecoin, miners are susceptible to two different types of cut: storage error cut, unanimously reduce error.
Storage Error Reduction is a term used to include a wider range of penalties, including error fees, sector penalties, and termination fees. Miners must pay these penalties if they fail to provide reliability of the sector or decide to leave the network voluntarily.
An error fee is a penalty that a miner incurs for each non-working day. Sector punishment: A penalty incurred by a miner of a disrupted sector for which no error was reported before the WindowPoSt inspection.
The sector will pay an error fee after the penalty of the sector once the error is discovered.
Termination Fee: A penalty that a miner incurs when a sector is voluntary or involuntarily terminated and removed from the network.
Cutting consensus error is the penalty that a miner incurs for committing consensus errors. This punishment applies to miners who have acted maliciously against the network consensus function.
Filecoin miners
Eight of the top 10 Felticoin miners are Chinese investors or companies, according to the blockchain explorer, while more companies are selling cloud mining contracts and distributed file sharing system hardware. CoinDesk’s Wolfe Chao wrote: “China’s craze for Filecoin may have been largely related to the long-standing popularity of crypto mining in the country overall, which is home to about 65% of the computing power on Bitcoin at discretion.”
With Filecoin approaching the launch of the mainnet blocknet — after several delays since the $ 200 million increase in 2017 — Chinese investors are once again speculating strongly about network mining devices and their premium prices.
Since Protocol Labs, the company behind Filecoin, released its “Test Incentives” program on June 9 that was scheduled to start in a week’s time, more than a dozen Chinese companies have started selling cloud mining contracts and hardware — despite important details such as economics Mining incentives on the main network are still endless.
Sales volumes to date for each of these companies can range from half a million to tens of millions of dollars, according to self-reported data on these platforms that CoinDesk has watched and interviews with several mining hardware manufacturers.
Filecoin’s goal is to build a distributed storage network with token rewards to spur storage hosting as a way to drive wider adoption. Protocol Labs launched a test network in December 2019. But the tokens mined in the testing environment so far are not representative of the true silicon coin that can be traded when the main network is turned on. Moreover, the mining incentive economics on testnet do not represent how final block rewards will be available on the main network.
However, data from Blockecoin’s blocknetin testnet explorers show that eight out of 10 miners with the most effective mining force on testnet are currently Chinese miners.
These eight miners have about 15 petabytes (PB) of effective storage mining power, accounting for more than 85% of the total test of 17.9 petable. For the context, 1 petabyte of hard disk storage = 1000 terabytes (terabytes) = 1 million gigabytes (GB).
Filecoin craze in China may be closely related to the long-standing popularity of crypt mining in the country overall, which is home to about 65% of the computing power on Bitcoin by estimation. In addition, there has been a lot of hype in China about foreign exchange mining since 2018, as companies promote all types of devices when the network is still in development.
“Encryption mining has always been popular in China,” said Andy Tien, co-founder of 1475, one of several mining hardware manufacturers in Philquin supported by prominent Chinese video indicators such as Fenbushi and Hashkey Capital.
“Even though the Velikoyen mining process is more technologically sophisticated, the idea of mining using hard drives instead of specialized machines like Bitcoin ASIC may be a lot easier for retailers to understand,” he said.
Meanwhile, according to Feixiaohao, a Chinese service comparable to CoinMarketCap, nearly 50 Chinese crypto exchanges are often somewhat unknown with some of the more well-known exchanges including Gate.io and Biki — have listed trading pairs for Filecoin currency contracts for USDT.
In bitcoin mining, at the current difficulty level, one segment per second (TH / s) fragmentation rate is expected to generate around 0.000008 BTC within 24 hours. The higher the number of TH / s, the greater the number of bitcoins it should be able to produce proportionately. But in Filecoin, the efficient mining force of miners depends on the amount of data stamped on the hard drive, not the total size of the hard drive.
To close data in the hard drive, the Filecoin miner still needs processing power, i.e. CPU or GPU as well as RAM. More powerful processors with improved software can confine data to the hard drive more quickly, so miners can combine more efficient mining energy faster on a given day.
As of this stage, there appears to be no transparent way at the network level for retail investors to see how much of the purchased hard disk drive was purchased which actually represents an effective mining force.
The U.S.-based Labs Protocol was behind Filecoin’s initial coin offer for 2017, which raised an astonishing $ 200 million.
This was in addition to a $ 50 million increase in private investment supported by notable venture capital projects including Sequoia, Anderson Horowitz and Union Square Ventures. CoinDk’s parent company, CoinDk, has also invested in Protocol Labs.
After rounds of delay, Protocol Protocols said in September 2019 that a testnet launch would be available around December 2019 and the main network would be rolled out in the first quarter of 2020.
The test started as promised, but the main network has been delayed again and is now expected to launch in August 2020. What is Filecoin mining process?
Filecoin mainly consists of three parts: the storage market (the chain), the blockecin Filecoin, and the search market (under the chain). Storage and research market in series and series respectively for security and efficiency. For users, the storage frequency is relatively low, and the security requirements are relatively high, so the storage process is placed on the chain. The retrieval frequency is much higher than the storage frequency when there is a certain amount of data. Given the performance problem in processing data on the chain, the retrieval process under the chain is performed. In order to solve the security issue of payment in the retrieval process, Filecoin adopts the micro-payment strategy. In simple terms, the process is to split the document into several copies, and every time the user gets a portion of the data, the corresponding fee is paid. Types of mines corresponding to Filecoin’s two major markets are miners and warehousers, among whom miners are primarily responsible for storing data and block packages, while miners are primarily responsible for data query. After the stable operation of the major Filecoin network in the future, the mining operator will be introduced, who is the main responsible for data maintenance.
In the initial release of Filecoin, the request matching mechanism was not implemented in the storage market and retrieval market, but the takeover mechanism was adopted. The three main parts of Filecoin correspond to three processes, namely the stored procedure, retrieval process, packaging and reward process. The following figure shows the simplified process and the income of the miners:
The Filecoin mining process is much more complicated, and the important factor in determining the previous mining profit is efficient storage. Effective storage is a key feature that distinguishes Filecoin from other decentralized storage projects. In Filecoin’s EC consensus, effective storage is similar to interest in PoS, which determines the likelihood that a miner will get the right to fill, that is, the proportion of miners effectively stored in the entire network is proportional to final mining revenue.
It is also possible to obtain higher effective storage under the same hardware conditions by improving the mining algorithm. However, the current increase in the number of benefits that can be achieved by improving the algorithm is still unknown.
It seeks to promote mining using Filecoin Discover
Filecoin announced Filecoin Discover — a step to encourage miners to join the Filecoin network. According to the company, Filecoin Discover is “an ever-growing catalog of numerous petabytes of public data covering literature, science, art, and history.” Miners interested in sharing can choose which data sets they want to store, and receive that data on a drive at a cost. In exchange for storing this verified data, miners will earn additional Filecoin above the regular block rewards for storing data. Includes the current catalog of open source data sets; ENCODE, 1000 Genomes, Project Gutenberg, Berkley Self-driving data, more projects, and datasets are added every day.
Ian Darrow, Head of Operations at Filecoin, commented on the announcement:
“Over 2.5 quintillion bytes of data are created every day. This data includes 294 billion emails, 500 million tweets and 64 billion messages on social media. But it is also climatology reports, disease tracking maps, connected vehicle coordinates and much more. It is extremely important that we maintain data that will serve as the backbone for future research and discovery”.
Miners who choose to participate in Filecoin Discover may receive hard drives pre-loaded with verified data, as well as setup and maintenance instructions, depending on the company. The Filecoin team will also host the Slack (fil-Discover-support) channel where miners can learn more.
Filecoin got its fair share of obstacles along the way. Last month Filecoin announced a further delay before its main network was officially launched — after years of raising funds.
In late July QEBR (OTC: QEBR) announced that it had ceded ownership of two subsidiaries in order to focus all of the company’s resources on building blockchain-based mining operations.
The QEBR technology team previously announced that it has proven its system as a Filecoin node valid with CPU, GPU, bandwidth and storage compatibility that meets all IPFS guidelines. The QEBR test system is connected to the main Filecoin blockchain and the already mined filecoin coin has already been tested.
“The disclosure of Sheen Boom and Jihye will allow our team to focus only on the upcoming global launch of Filecoin. QEBR branch, Shenzhen DZD Digital Technology Ltd. (“ DZD “), has a strong background in blockchain development, extraction Data, data acquisition, data processing, data technology research. We strongly believe Filecoin has the potential to be a leading blockchain-based cryptocurrency and will make every effort to make QEBR an important player when Mainecoin mainnet will be launched soon”.
IPFS and Filecoin
Filecoin and IPFS are complementary protocols for storing and sharing data in a decentralized network. While users are not required to use Filecoin and IPFS together, the two combined are working to resolve major failures in the current web infrastructure.
IPFS
It is an open source protocol that allows users to store and transmit verifiable data with each other. IPFS users insist on data on the network by installing it on their own device, to a third-party cloud service (known as Pinning Services), or through community-oriented systems where a group of individual IPFS users share resources to ensure the content stays live.
The lack of an integrated catalytic mechanism is the challenge Filecoin hopes to solve by allowing users to catalyze long-term distributed storage at competitive prices through the storage contract market, while maintaining the efficiency and flexibility that the IPFS network provides.
Using IPFS
In IPFS, the data is hosted by the required data installation nodes. For data to persist while the user node is offline, users must either rely on their other peers to install their data voluntarily or use a central install service to store data.
Peer-to-peer reliance caching data may be a good thing as one or multiple organizations share common files on an internal network, or where strong social contracts can be used to ensure continued hosting and preservation of content in the long run. Most users in an IPFS network use an installation service.
Using Filecoin
The last option is to install your data in a decentralized storage market, such as Filecoin. In Filecoin’s structure, customers make regular small payments to store data when a certain availability, while miners earn those payments by constantly checking the integrity of this data, storing it, and ensuring its quick recovery. This allows users to motivate Filecoin miners to ensure that their content will be live when it is needed, a distinct advantage of relying only on other network users as required using IPFS alone.
Filecoin, powered by IPFS
It is important to know that Filecoin is built on top of IPFS. Filecoin aims to be a very integrated and seamless storage market that takes advantage of the basic functions provided by IPFS, they are connected to each other, but can be implemented completely independently of each other. Users do not need to interact with Filecoin in order to use IPFS.
Some advantages of sharing Filecoin with IPFS:
Of all the decentralized storage projects, Filecoin is undoubtedly the most interested, and IPFS has been running stably for two years, fully demonstrating the strength of its core protocol.
Filecoin’s ability to obtain market share from traditional central storage depends on end-user experience and storage price. Currently, most Filecoin nodes are posted in the IDC room. Actual deployment and operation costs are not reduced compared to traditional central cloud storage, and the storage process is more complicated.
PoRep and PoSt, which has a large number of proofs of unknown operation, are required to cause the actual storage cost to be so, in the early days of the release of Filecoin. The actual cost of storing data may be higher than the cost of central cloud storage, but the initial storage node may reduce the storage price in order to obtain block rewards, which may result in the actual storage price lower than traditional central cloud storage.
In the long term, Filecoin still needs to take full advantage of its P2P storage, convert storage devices from specialization to civil use, and improve its algorithms to reduce storage costs without affecting user experience. The storage problem is an important problem to be solved in the blockchain field, so a large number of storage projects were presented at the 19th Web3 Summit. IPFS is an important part of Web3 visibility. Its development will affect the development of Web3 to some extent. Likewise, Web3 development somewhat determines the future of IPFS. Filecoin is an IPFS-based storage class project initiated by IPFS. There is no doubt that he is highly expected.
Resources :
  1. https://www.coindesk.com/filecoin-pushes-back-final-testing-phase-announces-calibration-period-for-miners
  2. https://docs.filecoin.io/mine/#types-of-miners https://www.nasdaq.com/articles/inside-the-craze-for-filecoin-crypto-mining-in-china-2020-07-12؟amp
  3. https://www.prnewswire.com/news-releases/qebr-streamlines-holdings-to-concentrate-on-filecoin-development-and-mining-301098731.html
  4. https://www.crowdfundinsider.com/2020/05/161200-filecoin-seeks-to-boost-mining-with-filecoin-discove
  5. https://zephyrnet.com/filecoin-seeks-to-boost-mining-with-filecoin-discove
  6. https://docs.filecoin.io/introduction/ipfs-and-filecoin/#filecoin-powered-by-ipfs
submitted by CoinEx_Institution to filecoin [link] [comments]

Why i’m bullish on Zilliqa (long read)

Hey all, I've been researching coins since 2017 and have gone through 100s of them in the last 3 years. I got introduced to blockchain via Bitcoin of course, analysed Ethereum thereafter and from that moment I have a keen interest in smart contact platforms. I’m passionate about Ethereum but I find Zilliqa to have a better risk reward ratio. Especially because Zilliqa has found an elegant balance between being secure, decentralised and scalable in my opinion.
 
Below I post my analysis why from all the coins I went through I’m most bullish on Zilliqa (yes I went through Tezos, EOS, NEO, VeChain, Harmony, Algorand, Cardano etc.). Note that this is not investment advice and although it's a thorough analysis there is obviously some bias involved. Looking forward to what you all think!
 
Fun fact: the name Zilliqa is a play on ‘silica’ silicon dioxide which means “Silicon for the high-throughput consensus computer.”
 
This post is divided into (i) Technology, (ii) Business & Partnerships, and (iii) Marketing & Community. I’ve tried to make the technology part readable for a broad audience. If you’ve ever tried understanding the inner workings of Bitcoin and Ethereum you should be able to grasp most parts. Otherwise just skim through and once you are zoning out head to the next part.
 
Technology and some more:
 
Introduction The technology is one of the main reasons why I’m so bullish on Zilliqa. First thing you see on their website is: “Zilliqa is a high-performance, high-security blockchain platform for enterprises and next-generation applications.” These are some bold statements.
 
Before we deep dive into the technology let’s take a step back in time first as they have quite the history. The initial research paper from which Zilliqa originated dates back to August 2016: Elastico: A Secure Sharding Protocol For Open Blockchains where Loi Luu (Kyber Network) is one of the co-authors. Other ideas that led to the development of what Zilliqa has become today are: Bitcoin-NG, collective signing CoSi, ByzCoin and Omniledger.
 
The technical white paper was made public in August 2017 and since then they have achieved everything stated in the white paper and also created their own open source intermediate level smart contract language called Scilla (functional programming language similar to OCaml) too.
 
Mainnet is live since end of January 2019 with daily transaction rate growing continuously. About a week ago mainnet reached 5 million transactions, 500.000+ addresses in total along with 2400 nodes keeping the network decentralised and secure. Circulating supply is nearing 11 billion and currently only mining rewards are left. Maximum supply is 21 billion with annual inflation being 7.13% currently and will only decrease with time.
 
Zilliqa realised early on that the usage of public cryptocurrencies and smart contracts were increasing but decentralised, secure and scalable alternatives were lacking in the crypto space. They proposed to apply sharding onto a public smart contract blockchain where the transaction rate increases almost linear with the increase in amount of nodes. More nodes = higher transaction throughput and increased decentralisation. Sharding comes in many forms and Zilliqa uses network-, transaction- and computational sharding. Network sharding opens up the possibility of using transaction- and computational sharding on top. Zilliqa does not use state sharding for now. We’ll come back to this later.
 
Before we continue disecting how Zilliqa achieves such from a technological standpoint it’s good to keep in mind that a blockchain being decentralised and secure and scalable is still one of the main hurdles in allowing widespread usage of decentralised networks. In my opinion this needs to be solved first before blockchains can get to the point where they can create and add large scale value. So I invite you to read the next section to grasp the underlying fundamentals. Because after all these premises need to be true otherwise there isn’t a fundamental case to be bullish on Zilliqa, right?
 
Down the rabbit hole
 
How have they achieved this? Let’s define the basics first: key players on Zilliqa are the users and the miners. A user is anybody who uses the blockchain to transfer funds or run smart contracts. Miners are the (shard) nodes in the network who run the consensus protocol and get rewarded for their service in Zillings (ZIL). The mining network is divided into several smaller networks called shards, which is also referred to as ‘network sharding’. Miners subsequently are randomly assigned to a shard by another set of miners called DS (Directory Service) nodes. The regular shards process transactions and the outputs of these shards are eventually combined by the DS shard as they reach consensus on the final state. More on how these DS shards reach consensus (via pBFT) will be explained later on.
 
The Zilliqa network produces two types of blocks: DS blocks and Tx blocks. One DS Block consists of 100 Tx Blocks. And as previously mentioned there are two types of nodes concerned with reaching consensus: shard nodes and DS nodes. Becoming a shard node or DS node is being defined by the result of a PoW cycle (Ethash) at the beginning of the DS Block. All candidate mining nodes compete with each other and run the PoW (Proof-of-Work) cycle for 60 seconds and the submissions achieving the highest difficulty will be allowed on the network. And to put it in perspective: the average difficulty for one DS node is ~ 2 Th/s equaling 2.000.000 Mh/s or 55 thousand+ GeForce GTX 1070 / 8 GB GPUs at 35.4 Mh/s. Each DS Block 10 new DS nodes are allowed. And a shard node needs to provide around 8.53 GH/s currently (around 240 GTX 1070s). Dual mining ETH/ETC and ZIL is possible and can be done via mining software such as Phoenix and Claymore. There are pools and if you have large amounts of hashing power (Ethash) available you could mine solo.
 
The PoW cycle of 60 seconds is a peak performance and acts as an entry ticket to the network. The entry ticket is called a sybil resistance mechanism and makes it incredibly hard for adversaries to spawn lots of identities and manipulate the network with these identities. And after every 100 Tx Blocks which corresponds to roughly 1,5 hour this PoW process repeats. In between these 1,5 hour no PoW needs to be done meaning Zilliqa’s energy consumption to keep the network secure is low. For more detailed information on how mining works click here.
Okay, hats off to you. You have made it this far. Before we go any deeper down the rabbit hole we first must understand why Zilliqa goes through all of the above technicalities and understand a bit more what a blockchain on a more fundamental level is. Because the core of Zilliqa’s consensus protocol relies on the usage of pBFT (practical Byzantine Fault Tolerance) we need to know more about state machines and their function. Navigate to Viewblock, a Zilliqa block explorer, and just come back to this article. We will use this site to navigate through a few concepts.
 
We have established that Zilliqa is a public and distributed blockchain. Meaning that everyone with an internet connection can send ZILs, trigger smart contracts etc. and there is no central authority who fully controls the network. Zilliqa and other public and distributed blockchains (like Bitcoin and Ethereum) can also be defined as state machines.
 
Taking the liberty of paraphrasing examples and definitions given by Samuel Brooks’ medium article, he describes the definition of a blockchain (like Zilliqa) as:
“A peer-to-peer, append-only datastore that uses consensus to synchronise cryptographically-secure data”.
 
Next he states that: >“blockchains are fundamentally systems for managing valid state transitions”.* For some more context, I recommend reading the whole medium article to get a better grasp of the definitions and understanding of state machines. Nevertheless, let’s try to simplify and compile it into a single paragraph. Take traffic lights as an example: all its states (red, amber and green) are predefined, all possible outcomes are known and it doesn’t matter if you encounter the traffic light today or tomorrow. It will still behave the same. Managing the states of a traffic light can be done by triggering a sensor on the road or pushing a button resulting in one traffic lights’ state going from green to red (via amber) and another light from red to green.
 
With public blockchains like Zilliqa this isn’t so straightforward and simple. It started with block #1 almost 1,5 years ago and every 45 seconds or so a new block linked to the previous block is being added. Resulting in a chain of blocks with transactions in it that everyone can verify from block #1 to the current #647.000+ block. The state is ever changing and the states it can find itself in are infinite. And while the traffic light might work together in tandem with various other traffic lights, it’s rather insignificant comparing it to a public blockchain. Because Zilliqa consists of 2400 nodes who need to work together to achieve consensus on what the latest valid state is while some of these nodes may have latency or broadcast issues, drop offline or are deliberately trying to attack the network etc.
 
Now go back to the Viewblock page take a look at the amount of transaction, addresses, block and DS height and then hit refresh. Obviously as expected you see new incremented values on one or all parameters. And how did the Zilliqa blockchain manage to transition from a previous valid state to the latest valid state? By using pBFT to reach consensus on the latest valid state.
 
After having obtained the entry ticket, miners execute pBFT to reach consensus on the ever changing state of the blockchain. pBFT requires a series of network communication between nodes, and as such there is no GPU involved (but CPU). Resulting in the total energy consumed to keep the blockchain secure, decentralised and scalable being low.
 
pBFT stands for practical Byzantine Fault Tolerance and is an optimisation on the Byzantine Fault Tolerant algorithm. To quote Blockonomi: “In the context of distributed systems, Byzantine Fault Tolerance is the ability of a distributed computer network to function as desired and correctly reach a sufficient consensus despite malicious components (nodes) of the system failing or propagating incorrect information to other peers.” Zilliqa is such a distributed computer network and depends on the honesty of the nodes (shard and DS) to reach consensus and to continuously update the state with the latest block. If pBFT is a new term for you I can highly recommend the Blockonomi article.
 
The idea of pBFT was introduced in 1999 - one of the authors even won a Turing award for it - and it is well researched and applied in various blockchains and distributed systems nowadays. If you want more advanced information than the Blockonomi link provides click here. And if you’re in between Blockonomi and University of Singapore read the Zilliqa Design Story Part 2 dating from October 2017.
Quoting from the Zilliqa tech whitepaper: “pBFT relies upon a correct leader (which is randomly selected) to begin each phase and proceed when the sufficient majority exists. In case the leader is byzantine it can stall the entire consensus protocol. To address this challenge, pBFT offers a view change protocol to replace the byzantine leader with another one.”
 
pBFT can tolerate ⅓ of the nodes being dishonest (offline counts as Byzantine = dishonest) and the consensus protocol will function without stalling or hiccups. Once there are more than ⅓ of dishonest nodes but no more than ⅔ the network will be stalled and a view change will be triggered to elect a new DS leader. Only when more than ⅔ of the nodes are dishonest (>66%) double spend attacks become possible.
 
If the network stalls no transactions can be processed and one has to wait until a new honest leader has been elected. When the mainnet was just launched and in its early phases, view changes happened regularly. As of today the last stalling of the network - and view change being triggered - was at the end of October 2019.
 
Another benefit of using pBFT for consensus besides low energy is the immediate finality it provides. Once your transaction is included in a block and the block is added to the chain it’s done. Lastly, take a look at this article where three types of finality are being defined: probabilistic, absolute and economic finality. Zilliqa falls under the absolute finality (just like Tendermint for example). Although lengthy already we skipped through some of the inner workings from Zilliqa’s consensus: read the Zilliqa Design Story Part 3 and you will be close to having a complete picture on it. Enough about PoW, sybil resistance mechanism, pBFT etc. Another thing we haven’t looked at yet is the amount of decentralisation.
 
Decentralisation
 
Currently there are four shards, each one of them consisting of 600 nodes. 1 shard with 600 so called DS nodes (Directory Service - they need to achieve a higher difficulty than shard nodes) and 1800 shard nodes of which 250 are shard guards (centralised nodes controlled by the team). The amount of shard guards has been steadily declining from 1200 in January 2019 to 250 as of May 2020. On the Viewblock statistics you can see that many of the nodes are being located in the US but those are only the (CPU parts of the) shard nodes who perform pBFT. There is no data from where the PoW sources are coming. And when the Zilliqa blockchain starts reaching their transaction capacity limit, a network upgrade needs to be executed to lift the current cap of maximum 2400 nodes to allow more nodes and formation of more shards which will allow to network to keep on scaling according to demand.
Besides shard nodes there are also seed nodes. The main role of seed nodes is to serve as direct access points (for end users and clients) to the core Zilliqa network that validates transactions. Seed nodes consolidate transaction requests and forward these to the lookup nodes (another type of nodes) for distribution to the shards in the network. Seed nodes also maintain the entire transaction history and the global state of the blockchain which is needed to provide services such as block explorers. Seed nodes in the Zilliqa network are comparable to Infura on Ethereum.
 
The seed nodes were first only operated by Zilliqa themselves, exchanges and Viewblock. Operators of seed nodes like exchanges had no incentive to open them for the greater public.They were centralised at first. Decentralisation at the seed nodes level has been steadily rolled out since March 2020 ( Zilliqa Improvement Proposal 3 ). Currently the amount of seed nodes is being increased, they are public facing and at the same time PoS is applied to incentivize seed node operators and make it possible for ZIL holders to stake and earn passive yields. Important distinction: seed nodes are not involved with consensus! That is still PoW as entry ticket and pBFT for the actual consensus.
 
5% of the block rewards are being assigned to seed nodes (from the beginning in 2019) and those are being used to pay out ZIL stakers.The 5% block rewards with an annual yield of 10.03% translates to roughly 610 MM ZILs in total that can be staked. Exchanges use the custodial variant of staking and wallets like Moonlet will use the non custodial version (starting in Q3 2020). Staking is being done by sending ZILs to a smart contract created by Zilliqa and audited by Quantstamp.
 
With a high amount of DS & shard nodes and seed nodes becoming more decentralised too, Zilliqa qualifies for the label of decentralised in my opinion.
 
Smart contracts
 
Let me start by saying I’m not a developer and my programming skills are quite limited. So I‘m taking the ELI5 route (maybe 12) but if you are familiar with Javascript, Solidity or specifically OCaml please head straight to Scilla - read the docs to get a good initial grasp of how Zilliqa’s smart contract language Scilla works and if you ask yourself “why another programming language?” check this article. And if you want to play around with some sample contracts in an IDE click here. Faucet can be found here. And more information on architecture, dapp development and API can be found on the Developer Portal.
If you are more into listening and watching: check this recent webinar explaining Zilliqa and Scilla. Link is time stamped so you’ll start right away with a platform introduction, R&D roadmap 2020 and afterwards a proper Scilla introduction.
 
Generalised: programming languages can be divided into being ‘object oriented’ or ‘functional’. Here is an ELI5 given by software development academy: > “all programmes have two basic components, data – what the programme knows – and behaviour – what the programme can do with that data. So object-oriented programming states that combining data and related behaviours in one place, is called “object”, which makes it easier to understand how a particular program works. On the other hand, functional programming argues that data and behaviour are different things and should be separated to ensure their clarity.”
 
Scilla is on the functional side and shares similarities with OCaml: > OCaml is a general purpose programming language with an emphasis on expressiveness and safety. It has an advanced type system that helps catch your mistakes without getting in your way. It's used in environments where a single mistake can cost millions and speed matters, is supported by an active community, and has a rich set of libraries and development tools. For all its power, OCaml is also pretty simple, which is one reason it's often used as a teaching language.
 
Scilla is blockchain agnostic, can be implemented onto other blockchains as well, is recognised by academics and won a so called Distinguished Artifact Award award at the end of last year.
 
One of the reasons why the Zilliqa team decided to create their own programming language focused on preventing smart contract vulnerabilities safety is that adding logic on a blockchain, programming, means that you cannot afford to make mistakes. Otherwise it could cost you. It’s all great and fun blockchains being immutable but updating your code because you found a bug isn’t the same as with a regular web application for example. And with smart contracts it inherently involves cryptocurrencies in some form thus value.
 
Another difference with programming languages on a blockchain is gas. Every transaction you do on a smart contract platform like Zilliqa for Ethereum costs gas. With gas you basically pay for computational costs. Sending a ZIL from address A to address B costs 0.001 ZIL currently. Smart contracts are more complex, often involve various functions and require more gas (if gas is a new concept click here ).
 
So with Scilla, similar to Solidity, you need to make sure that “every function in your smart contract will run as expected without hitting gas limits. An improper resource analysis may lead to situations where funds may get stuck simply because a part of the smart contract code cannot be executed due to gas limits. Such constraints are not present in traditional software systems”. Scilla design story part 1
 
Some examples of smart contract issues you’d want to avoid are: leaking funds, ‘unexpected changes to critical state variables’ (example: someone other than you setting his or her address as the owner of the smart contract after creation) or simply killing a contract.
 
Scilla also allows for formal verification. Wikipedia to the rescue:
In the context of hardware and software systems, formal verification is the act of proving or disproving the correctness of intended algorithms underlying a system with respect to a certain formal specification or property, using formal methods of mathematics.
 
Formal verification can be helpful in proving the correctness of systems such as: cryptographic protocols, combinational circuits, digital circuits with internal memory, and software expressed as source code.
 
Scilla is being developed hand-in-hand with formalization of its semantics and its embedding into the Coq proof assistant — a state-of-the art tool for mechanized proofs about properties of programs.”
 
Simply put, with Scilla and accompanying tooling developers can be mathematically sure and proof that the smart contract they’ve written does what he or she intends it to do.
 
Smart contract on a sharded environment and state sharding
 
There is one more topic I’d like to touch on: smart contract execution in a sharded environment (and what is the effect of state sharding). This is a complex topic. I’m not able to explain it any easier than what is posted here. But I will try to compress the post into something easy to digest.
 
Earlier on we have established that Zilliqa can process transactions in parallel due to network sharding. This is where the linear scalability comes from. We can define simple transactions: a transaction from address A to B (Category 1), a transaction where a user interacts with one smart contract (Category 2) and the most complex ones where triggering a transaction results in multiple smart contracts being involved (Category 3). The shards are able to process transactions on their own without interference of the other shards. With Category 1 transactions that is doable, with Category 2 transactions sometimes if that address is in the same shard as the smart contract but with Category 3 you definitely need communication between the shards. Solving that requires to make a set of communication rules the protocol needs to follow in order to process all transactions in a generalised fashion.
 
And this is where the downsides of state sharding comes in currently. All shards in Zilliqa have access to the complete state. Yes the state size (0.1 GB at the moment) grows and all of the nodes need to store it but it also means that they don’t need to shop around for information available on other shards. Requiring more communication and adding more complexity. Computer science knowledge and/or developer knowledge required links if you want to dig further: Scilla - language grammar Scilla - Foundations for Verifiable Decentralised Computations on a Blockchain Gas Accounting NUS x Zilliqa: Smart contract language workshop
 
Easier to follow links on programming Scilla https://learnscilla.com/home Ivan on Tech
 
Roadmap / Zilliqa 2.0
 
There is no strict defined roadmap but here are topics being worked on. And via the Zilliqa website there is also more information on the projects they are working on.
 
Business & Partnerships  
It’s not only technology in which Zilliqa seems to be excelling as their ecosystem has been expanding and starting to grow rapidly. The project is on a mission to provide OpenFinance (OpFi) to the world and Singapore is the right place to be due to its progressive regulations and futuristic thinking. Singapore has taken a proactive approach towards cryptocurrencies by introducing the Payment Services Act 2019 (PS Act). Among other things, the PS Act will regulate intermediaries dealing with certain cryptocurrencies, with a particular focus on consumer protection and anti-money laundering. It will also provide a stable regulatory licensing and operating framework for cryptocurrency entities, effectively covering all crypto businesses and exchanges based in Singapore. According to PWC 82% of the surveyed executives in Singapore reported blockchain initiatives underway and 13% of them have already brought the initiatives live to the market. There is also an increasing list of organisations that are starting to provide digital payment services. Moreover, Singaporean blockchain developers Building Cities Beyond has recently created an innovation $15 million grant to encourage development on its ecosystem. This all suggest that Singapore tries to position itself as (one of) the leading blockchain hubs in the world.
 
Zilliqa seems to already taking advantage of this and recently helped launch Hg Exchange on their platform, together with financial institutions PhillipCapital, PrimePartners and Fundnel. Hg Exchange, which is now approved by the Monetary Authority of Singapore (MAS), uses smart contracts to represent digital assets. Through Hg Exchange financial institutions worldwide can use Zilliqa's safe-by-design smart contracts to enable the trading of private equities. For example, think of companies such as Grab, AirBnB, SpaceX that are not available for public trading right now. Hg Exchange will allow investors to buy shares of private companies & unicorns and capture their value before an IPO. Anquan, the main company behind Zilliqa, has also recently announced that they became a partner and shareholder in TEN31 Bank, which is a fully regulated bank allowing for tokenization of assets and is aiming to bridge the gap between conventional banking and the blockchain world. If STOs, the tokenization of assets, and equity trading will continue to increase, then Zilliqa’s public blockchain would be the ideal candidate due to its strategic positioning, partnerships, regulatory compliance and the technology that is being built on top of it.
 
What is also very encouraging is their focus on banking the un(der)banked. They are launching a stablecoin basket starting with XSGD. As many of you know, stablecoins are currently mostly used for trading. However, Zilliqa is actively trying to broaden the use case of stablecoins. I recommend everybody to read this text that Amrit Kumar wrote (one of the co-founders). These stablecoins will be integrated in the traditional markets and bridge the gap between the crypto world and the traditional world. This could potentially revolutionize and legitimise the crypto space if retailers and companies will for example start to use stablecoins for payments or remittances, instead of it solely being used for trading.
 
Zilliqa also released their DeFi strategic roadmap (dating November 2019) which seems to be aligning well with their OpFi strategy. A non-custodial DEX is coming to Zilliqa made by Switcheo which allows cross-chain trading (atomic swaps) between ETH, EOS and ZIL based tokens. They also signed a Memorandum of Understanding for a (soon to be announced) USD stablecoin. And as Zilliqa is all about regulations and being compliant, I’m speculating on it to be a regulated USD stablecoin. Furthermore, XSGD is already created and visible on block explorer and XIDR (Indonesian Stablecoin) is also coming soon via StraitsX. Here also an overview of the Tech Stack for Financial Applications from September 2019. Further quoting Amrit Kumar on this:
 
There are two basic building blocks in DeFi/OpFi though: 1) stablecoins as you need a non-volatile currency to get access to this market and 2) a dex to be able to trade all these financial assets. The rest are build on top of these blocks.
 
So far, together with our partners and community, we have worked on developing these building blocks with XSGD as a stablecoin. We are working on bringing a USD-backed stablecoin as well. We will soon have a decentralised exchange developed by Switcheo. And with HGX going live, we are also venturing into the tokenization space. More to come in the future.”*
 
Additionally, they also have this ZILHive initiative that injects capital into projects. There have been already 6 waves of various teams working on infrastructure, innovation and research, and they are not from ASEAN or Singapore only but global: see Grantees breakdown by country. Over 60 project teams from over 20 countries have contributed to Zilliqa's ecosystem. This includes individuals and teams developing wallets, explorers, developer toolkits, smart contract testing frameworks, dapps, etc. As some of you may know, Unstoppable Domains (UD) blew up when they launched on Zilliqa. UD aims to replace cryptocurrency addresses with a human readable name and allows for uncensorable websites. Zilliqa will probably be the only one able to handle all these transactions onchain due to ability to scale and its resulting low fees which is why the UD team launched this on Zilliqa in the first place. Furthermore, Zilliqa also has a strong emphasis on security, compliance, and privacy, which is why they partnered with companies like Elliptic, ChainSecurity (part of PwC Switzerland), and Incognito. Their sister company Aqilliz (Zilliqa spelled backwards) focuses on revolutionizing the digital advertising space and is doing interesting things like using Zilliqa to track outdoor digital ads with companies like Foodpanda.
 
Zilliqa is listed on nearly all major exchanges, having several different fiat-gateways and recently have been added to Binance’s margin trading and futures trading with really good volume. They also have a very impressive team with good credentials and experience. They dont just have “tech people”. They have a mix of tech people, business people, marketeers, scientists, and more. Naturally, it's good to have a mix of people with different skill sets if you work in the crypto space.
 
Marketing & Community
 
Zilliqa has a very strong community. If you just follow their Twitter their engagement is much higher for a coin that has approximately 80k followers. They also have been ‘coin of the day’ by LunarCrush many times. LunarCrush tracks real-time cryptocurrency value and social data. According to their data it seems Zilliqa has a more fundamental and deeper understanding of marketing and community engagement than almost all other coins. While almost all coins have been a bit frozen in the last months, Zilliqa seems to be on its own bull run. It was somewhere in the 100s a few months ago and is currently ranked #46 on CoinGecko. Their official Telegram also has over 20k people and is very active, and their community channel which is over 7k now is more active and larger than many other official channels. Their local communities) also seem to be growing.
 
Moreover, their community started ‘Zillacracy’ together with the Zilliqa core team ( see www.zillacracy.com ). It’s a community run initiative where people from all over the world are now helping with marketing and development on Zilliqa. Since its launch in February 2020 they have been doing a lot and will also run their own non custodial seed node for staking. This seed node will also allow them to start generating revenue for them to become a self sustaining entity that could potentially scale up to become a decentralized company working in parallel with the Zilliqa core team. Comparing it to all the other smart contract platforms (e.g. Cardano, EOS, Tezos etc.) they don't seem to have started a similar initiatives (correct me if I’m wrong though). This suggest in my opinion that these other smart contract platforms do not fully understand how to utilize the ‘power of the community’. This is something you cannot ‘buy with money’ and gives many projects in the space a disadvantage.
 
Zilliqa also released two social products called SocialPay and Zeeves. SocialPay allows users to earn ZILs while tweeting with a specific hashtag. They have recently used it in partnership with the Singapore Red Cross for a marketing campaign after their initial pilot program. It seems like a very valuable social product with a good use case. I can see a lot of traditional companies entering the space through this product, which they seem to suggest will happen. Tokenizing hashtags with smart contracts to get network effect is a very smart and innovative idea.
 
Regarding Zeeves, this is a tipping bot for Telegram. They already have 1000s of signups and they plan to keep upgrading it for more and more people to use it (e.g. they recently have added a quiz features). They also use it during AMAs to reward people in real time. It’s a very smart approach to grow their communities and get familiar with ZIL. I can see this becoming very big on Telegram. This tool suggests, again, that the Zilliqa team has a deeper understanding what the crypto space and community needs and is good at finding the right innovative tools to grow and scale.
 
To be honest, I haven’t covered everything (i’m also reaching the character limited haha). So many updates happening lately that it's hard to keep up, such as the International Monetary Fund mentioning Zilliqa in their report, custodial and non-custodial Staking, Binance Margin, Futures & Widget, entering the Indian market, and more. The Head of Marketing Colin Miles has also released this as an overview of what is coming next. And last but not least, Vitalik Buterin has been mentioning Zilliqa lately acknowledging Zilliqa and mentioning that both projects have a lot of room to grow. There is much more info of course and a good part of it has been served to you on a silver platter. I invite you to continue researching by yourself :-) And if you have any comments or questions please post here!
submitted by haveyouheardaboutit to CryptoCurrency [link] [comments]

[Researh] In 2017 bitcoin network consumed 5 TWh of energy, in 2018 – 29 TWh, in 2019 – 43 TWh. Banking industry consumes 74 TWh per year.

[Researh] In 2017 bitcoin network consumed 5 TWh of energy, in 2018 – 29 TWh, in 2019 – 43 TWh. Banking industry consumes 74 TWh per year.
Electricity consumed by bitcoin network has been constantly and noticeably increasing. During the past years the consumption reached such big a scale, that it can be compared to electricity consumption of some countries, according to BlockchainAnalytics.pro research.
The world’s first cryptocurrency is steadily becoming more popular and expensive every year. This motivates more individuals and companies to enter the mining business to earn a bitcoin share.

More miners, more efficient equipment

To validate a block of transactions and receive a reward, miners compete with each other by solving a deliberately complicated mathematical task, or puzzle. Those miners who own more computing power (hashrate) have more chances to win the competition. This incentivizes miners to buy more powerful equipment that consumes more electricity.
At the same time, mining equipment efficiency is constantly improving, and with time less electricity is required to produce the same hashrate. This factor allows to slow down the increasing demand for electricity.
For example, in 2016 Bitmain, world’s largest manufacturer of mining equipment, launched the legendary Antminer S9, which consumed 100 watts to produce one terahash per second, or 100 W/TH/s. The best modification of Antminer S15, released in 2018, consumed 57 W/TH/s. Currently, the most efficient Antminer S17 consumes only 40 W/TH/s.
https://preview.redd.it/gh343l3p09j41.png?width=930&format=png&auto=webp&s=e350c1e7832e37c1e3c3aeac974428cca7f0f874
It is assumed that the market competition compels manufacturers to keep up with each other in developing more efficient hardware. If some manufacturer brings next-generation chips to market, other manufacturers start to produce chips with the same characteristics at about the same time.
On the other hand, new miners are joining the network, thus increasing the hashrate. So the demand for electricity continues to grow. Also, it can be noticed later that the electricity consumption chart is similar to that of hashrate chart.
https://preview.redd.it/3k32ci6q09j41.png?width=930&format=png&auto=webp&s=e70f600419bcbc9e7e82506b5f12bf4da6f00584

Calculations

The incremental volume of electricity consumption is calculated by multiplying newly added hashrate by the best mining efficiency available at that moment.
The sum of incremental volumes represents cumulative amount of electricity consumed by bitcoin network. The metric is expressed in terawatt-hours (TWh). To get annualized volume in terawatt-hours we multiply the consumption by 24 hours and 365 days.
A 100-day moving average was applied to hashrate to make the final result less dependent on the short-term hashrate fluctuations.
Assumptions, used in this study, are very conservative. It means that the results are in the lower limit of the range of possible volumes, and the actual electricity consumption can be higher.
A detailed explanation and interactive charts are provided here: https://www.blockchainanalytics.pro/btc/electricity-consumption/
https://preview.redd.it/jol3703r09j41.png?width=929&format=png&auto=webp&s=252d4d67ff6882bb32ad63238537a41305719f05

Results

Currently, annualized electricity consumption in bitcoin network is 57 TWh. To help readers get an idea of how much electricity the bitcoin network consumes, a comparison with some countries is provided alongside.
Portugal consumes 49 TWh per year, Romania – 50 TWh, Czech Republic – 59 TWh.
Some more numbers for comparison:
https://preview.redd.it/hka7lcwr09j41.png?width=930&format=png&auto=webp&s=92d6d0b25f922a1e6f0c45c6f994e78aded6f920
According to conservative estimates, the bitcoin network will consume more than 70 TWh in 2020. This is on a par with Chile, a country with 18 million population.

More thoughts (estimations of how much energy banking industry consumes)

Some information from official reports:
Taking into account the information above, we can assume that, on average, banks spend ~20 kWh per customer per year.
Some information on world population:
  • 69% of adults around the world have a banking account (source)
  • 70% of the world population are adults (source)
  • World population is 7.7 billion (source)
Finally: 7.7 billion people * 70% * 69% * 20 kWh per year = ~74 TWh per year
So, we can assume, that banking industry consumes ~74 TWh per year
submitted by answer__42 to btc [link] [comments]

Antminer T19 May Not Affect Bitcoin Hash Rate but Keeps Bitmain Ahead

The Antminer T19 by Bitmain may not have a big impact on the Bitcoin network, and it comes out amid the firm’s internal and post-halving uncertainty.
Earlier this week, Chinese mining-hardware juggernaut Bitmain unveiled its new product, an application-specific integrated circuit called Antminer T19. The Bitcoin (BTC) mining unit is the latest to join the new generation of ASICs — state-of-the-art devices designed to mitigate increased mining difficulty by maximizing the terahashes-per-second output.
The Antminer T19 announcement comes amid the post-halving uncertainty and follows the company’s recent problems with its S17 units. So, can this new machine help Bitmain to reinforce its somewhat hobbled position in the mining sector?
T19: The cheaper S19
According to the official announcement, the Antminer T19 features a mining speed of 84 TH/s and a power efficiency of 37.5 joules per TH. The chips used in the new device are the same as those equipped in the Antminer S19 and S19 Pro, though it uses the new APW12 version of the power supply system that allows the device to start up faster.
Bitmain usually markets its Antminer T devices as the most cost-effective ones, while the S-series models are presented as the top of the line in terms of productivity for their respective generation, Johnson Xu — the head of research and analytics at Tokensight — explained to Cointelegraph. According to data from F2Pool, one of the largest Bitcoin mining pools, Antminer T19s can generate $3.97 of profit each day, while Antminer S19s and Antminer S19 Pros can earn $4.86 and $6.24, respectively, based on an average electricity cost of $0.05 per kilowatt-hour.
Antminer T19s, which consume 3,150 watts, are being sold for $1,749 per unit. Antminer S19 machines, on the other hand, cost $1,785 and consume 3,250 watts. Antminer S19 Pro devices, the most efficient of three, are considerably more expensive and go for $2,407. The reason Bitmain is producing another model for the 19 series is due to what is known as "binning" chips, Marc Fresa — the founder of mining firmware company Asic.to — explained to Cointelegraph:
“When chips are designed they are meant to achieve specific performance levels. Chips that fail to hit their target numbers, such as not achieving the power standards or their thermal output, are often ‘Binned.’ Instead of throwing these chips in the garbage bin, these chips are resold into another unit with a lower performance level. In the case of Bitmain S19 chips that don’t make the cutoff are then sold in the T19 for cheaper since they do not perform as well as the counterpart.” The rollout of a new model “has nothing to do with the fact that machines are not selling well,” Fresa went on to argue, citing the post-halving uncertainty: “The biggest reason machines probably are not selling as well as manufacturers would like is because we are on a bit of a tipping point; The halving just happened, the price can go anyway and the difficulty is continuing to drop.” Product diversification is a common strategy for mining hardware producers, given that customers tend to aim for different specifications, Kristy-Leigh Minehan, a consultant and the former chief technology officer of Genesis Mining, told Cointelegraph:
“ASICs don’t really allow for one model as consumers expect a certain performance level from a machine, and unfortunately silicon is not a perfect process — many times you’ll get a batch that performs better or worse than projected due to the nature of the materials. Thus, you end up with 5–10 different model numbers.” It is not yet clear how efficient the 19-series devices are because they have not shipped at scale, as Leo Zhang, the founder of Anicca Research, summed up in a conversation with Cointelegraph. The first batch of S19 units reportedly shipped out around May 12, while the T19 shipments will start between June 21 and June 30. It is also worth noting that, at this time, Bitmain only sells up to two T19 miners per user “to prevent hoarding.”
Hardware problems and competitors
The latest generation of Bitmain ASICs follows the release of the S17 units, which have received mostly mixed-to-negative reviews in the community. In early May, Arseniy Grusha, the co-founder of crypto consulting and mining firm Wattum, created a Telegram group for consumers unsatisfied with the S17 units they purchased from Bitmain. As Grusha explained to Cointelegraph at the time, out of the 420 Antminer S17+ devices his company bought, roughly 30%, or around 130 machines, turned out to be bad units.
Similarly, Samson Mow, the chief strategy officer of blockchain infrastructure firm Blockstream, tweeted earlier in April that Bitmain customers have a 20%–30% failure rate with Antminer S17 and T17 units. “The Antminer 17 series is generally considered not great,” added Zhang. He additionally noted that Chinese hardware company and competitor Micro BT has been stepping on Bitmain’s toes lately with the release of its highly productive M30 series, which prompted Bitmain to step up its efforts:
“Whatsminer gained significant market share in the past two years. According to their COO, in 2019 MicroBT sold ~35% of the network hashrate. Needless to say Bitmain is under a lot of pressure both from competitors and internal politics. They have been working on the 19 series for a while. The specs and price look very attractive.” Minehan confirmed that MicroBT has been gaining traction on the market, but refrained from saying that Bitmain is losing market share as a result: “I think MicroBT is offering option and bringing in new participants, and giving farms a choice. Most farms will have both Bitmain and MicroBT side by side, rather than exclusively host one manufacturer.”
“I would say that MicroBT has taken up the existing market share that Canaan has left,” she added, referring to another China-based mining player that recently reported a net loss of $5.6 million in the first quarter of 2020 and cut the price of its mining hardware by up to 50%.
Indeed, some large-scale operations seem to be diversifying their equipment with MicroBT units. Earlier this week, United States mining firm Marathon Patent Group announced that it had installed 700 Whatsminer M30S+ ASICs produced by MicroBT. However, it is also reportedly waiting for a delivery of 1,160 Antminer S19 Pro units produced by Bitmain, meaning that it also remains loyal to the current market leader.
Will the hash rate be affected?
Bitcoin’s hash rate plummeted 30% soon after the halving occurred as much of the older generation equipment became unprofitable due to the increased mining difficulty. That spurred miners to reshuffle, upgrading their current rigs and selling older machines to places where electricity is cheaper — meaning that some of them had to temporarily unplug.
The situation has stabilized since, with the hash rate fluctuating around 100 TH/s for the past few days. Some experts attribute that to the start of the wet season in Sichuan, a southwest Chinese province where miners take advantage of low hydroelectricity prices between May and October.
The arrival of the new generation of ASICs is expected to drive the hash rate even higher, at least once upgraded units become widely available. So, will the newly revealed T19 model make any impact on the state of the network?
Experts agree that it won’t affect the hash rate to a major degree, as it’s a lower output model compared with the S19 series and MicroBT’s M30 series. Minehan said she doesn’t expect the T19 model “to have a huge impact that’s an immediate cause of concern,” as “most likely this is a run of <3500 units of a particular bin quality.” Similarly, Mark D’Aria, the CEO of crypto consulting firm Bitpro, told Cointelegraph:
“There isn’t a strong reason to expect the new model to significantly affect the hashrate. It might be a slightly more compelling option to a miner with extraordinarily inexpensive electricity, but otherwise they likely would have just purchased an S19 instead.” Bitmain continues to hold leadership despite internal struggle
At the end of the day, manufacturers are always in an arms race, and mining machines are simply commodity products, Zhang argued in a conversation with Cointelegraph:
“Besides price, performance, and failure rate, there are not many factors that can help a manufacturer differentiate from the others. The relentless competition led to where we are today.” According to Zhang, as the iteration rate naturally slows down in the future, there will be more facilities using “creative thermal design such as immersion cooling,” hoping to maximize the mining efficiency beyond just using most powerful machines.
As for now, Bitmain remains the leader of the mining race, despite having to deal with the largely defunct 17 series and an intensifying power struggle between its two co-founders, Jihan Wu and Micree Zhan, which recently resulted in reports of a street brawl.
“Due to its recent internal issues, Bitmain is facing challenges to keep its strong position in the future thus they started to look at other things to expand its industry influences,” Xu told Cointelegraph. He added that Bitmain “will still dominate the industry position in the near future due to its network effect,” although its current problems might allow competitors such as MicroBT to catch up.
Earlier this week, the power struggle inside Bitmain intensified even further as Micree Zhan, an ousted executive of the mining titan, reportedly led a group of private guards to overtake the company’s office in Beijing.
Meanwhile, Bitmain continues to expand its operations. Last week, the mining company revealed it was extending its “Ant Training Academy” certification program to North America, with the first courses set to launch in the fall. As such, Bitmain seems to be doubling down on the U.S.-based mining sector, which has been growing recently. The Beijing-based company already operates what it classifies as “the world’s largest” mining facility in Rockdale, Texas, which has a planned capacity of 50 megawatts that can later be expanded to 300 megawatts.
submitted by melissaBrian0 to Bitcoin [link] [comments]

Zigmabit fastest and most efficient crypto miners 🔴 SCAM 🔴

Zigmabit fastest and most efficient crypto miners 🔴 SCAM 🔴
https://preview.redd.it/wk4gh9rm3cb41.jpg?width=1280&format=pjpg&auto=webp&s=db173c6ddb6d51581b6e1f638c0a0465df8f5020
We are not even in a bull market yet. Usually these things happen when there is a lot of hype. ZigmaBit is scammer company with fake mining rigs to basically scam you. Their selling website is https://zigmabit.com/ , please don't even click the link. We do not want to give them any traffic, just watch the video down below.
They have listed 3 miners on their website:
  • ZigBit 2.0
  • ZigBit 3.0
  • ZigBit 5.0

https://preview.redd.it/406xtn2l3cb41.jpg?width=1676&format=pjpg&auto=webp&s=4933fa05a303be6ece49fa37c4e8845fa8636605
Which of course doesn't exist. They recommend that these miners will make some crazy gains, which of course will not happen. As these miners are fake. Seeing the specification makes me think these guys know very little about crypto currency mining. So for example the specification they are advertising on ZigBit 5.0 is :
  • Bitcoin-2000 TH/s
  • Litecoin-300 GH/s
  • Ethereum-75 GH/s
  • Dash-50 TH/s
  • Power Consumption-2400W
  • Power Socket 110V-240V
Now you understand what im talking about, seriously 2000 TH/s mining Bitcoin at 2400w (where the latest Antminer S17 is 72Th/s), or mining ETH and the profit is so big that it will cover the miner cost faster then month. And another thing, they using the same hardware to mine multiple currencies which every one of them needs different hardware. Worst thing is that people will loose money, and most likely some of them already did. People think they will get rich after buying this miner, which they will never receive. Their fake products look so bad, their cheapest version ZiBit 2.0 looks like an ATX power supply.

https://preview.redd.it/sj7oslyl3cb41.jpg?width=1606&format=pjpg&auto=webp&s=470d5ceb04049cb3b617eb3fa1294e414def0b90
Few things to also note is :
  • They have support chat on their website. I did send them a message and got response after about 20 minutes. So they told me that they only accept crypto currency, and the products are shipped from United Kingdom. My last line of the chat was "im coming for you you'll be in jail soon ".
  • When you google miner name, there is few websites coming up describing how great is their product. This most likely is owned websites for this scammer or this is purchased content posts.
  • Last thing is that i tired to do checkout on one miner, there is btc address which has already received 7btc. Im not sure if this is some people got already scammed or this is fake volume, hope this is fake volume https://www.blockchain.com/btc/address/1C4RSshoK9veR4jCNStqF32QARS5oGnmzw . Hope none is scammed.
Sad to see that there is such kind of people who makes money on scamming others. Man karma is there , i believe it will come for you sooner or later.
video - https://www.youtube.com/watch?v=j4Bc7\_hNk4o&feature=youtu.be
submitted by mineshop to gpumining [link] [comments]

Thinking of starting a small Bitcoin mining facility, need some advice

I'm thinking of starting a Bitcoin mining data center in a third world country (Georgia). I have access to cheap facility that needs some slight renovation, with possibility of renting small area and expanding in the future. Rent is really cheap (~$3-4 per m2 per month). There is access to about 900kw, with an approximate cost of electricity of 5-8cents per kw/h. Local import laws seem to be rather lenient towards mining rigs, so it's pretty straightforward to import equipment here. All profit calculations seem to be showing an roi of 4-10 months depending on the cost of equipment (antminer s9 is what I plan on using if I can get my hands on them at reasonable price). Facility would require certain investment in cooling equipment and overall renovation (rats are somewhat frequent visitor). But overall it seems like an area worth investing. Obviously the profits might and most likely will shrink as time goes by and new equipment gets released, so I am mindful of the risks and the money invested are not gonna be my drawn from my pension fund. The plan is to start off with about 10 rigs and expand as time goes by. I haven't yet decided whether I want to keep profits in btc or cash them all out, or maintain a certain ratio, but I am leaning towards holding btc long term. So my questions is, am I overlooking some obvious and crucial risks in this operation? Personnel wise, I am in process of hiring 1-2 people for this operation, part time. Labor cost is not high in Georgia so should the operation expand, this cost would be negligeble. Personally I don't think I will be moving there full, but certainly will be there during the setup process. Any piece of advice for or against this project would be highly appreciated, especially from people that have experience in establishing similar facilities.
submitted by adgloriam to BitcoinMining [link] [comments]

85 TH/s 🔔 Antminer S17 | hiveOS custom firmware overclock !?

85 TH/s 🔔 Antminer S17 | hiveOS custom firmware overclock !?
https://preview.redd.it/vs8b0fpg9id41.jpg?width=1280&format=pjpg&auto=webp&s=7d4a7de2c9b2b712d959b06f4f6e01cbf7e664ca
For years now there has been possibilities to increase Bitmain bitcoin miners “antminer” efficiency with custom firmware. It is understandable that Bitmain don’t want their customers to change overclock on their asic miners. OC changes could possibly kill or damage hardware in some cases when chip oc and voltages applied to much. Overclock could kill miner it self or power supply. This is one of the reasons why Bitmain lately locks down their miners firmware, they dont want customers to do any changes on them.
The factory settings are standard, whoever is mining for while now. Knows that from some chips you can get better efficiency, just because quality of every chip is not the same. Lately there is been released an upgrade firmware and manual for Antminer S17 from hiveOS. HiveOS is gpu and asic miner monitoring/remote control. They previous firmware for Antminer S9 and T9 has been very successful. We have done review on this firmware also, and the best feature what Bitmain original firmware does not have is auto-chip tuning. It works very well, basically it finds the most optimal chip oc and the voltages to reach best efficiency.

https://preview.redd.it/ewt2x2v59id41.jpg?width=1702&format=pjpg&auto=webp&s=008de1118c5721a4844cf90c25e4f1fc72b71b73
We have now also tested the new firmware for Antminer S17, it does perform much better then Bitmain original firmware.On Antminer S17 53TH/s version , air cooled miner we where able to reach 75TH/s u/3300 watts. It worked very well and setup is straight forward. It is possible to reach even better performance up to 85 TH/s , but you will need immersion cooling. As with air cooled at 75 th/s our miner chip temperatures where close to 80c at room temperature 15c. Also be careful , Bitmani stock power supply Antminer S17 max power usage is 3500 watts.

https://preview.redd.it/vwovczl69id41.jpg?width=1952&format=pjpg&auto=webp&s=211b252bd225b1dc7e35195bc86c823b2e2ad7ad
hiveOS asic miner the installation guide :

Notes

And now let’s go back to the installation process. There is no universal manual, for S17 and S17 Pro there are 3 versions of stock firmware. Therefore, every particular case has its own manual on the custom firmware installation.
Please note, that all the manual steps which involve using BTCTOOLS can be done via ASIC’s web interface (BTCTOOLS is usually used for a large number of devices).

Preparation Stage (required for all the options):

1 .Download and unzip the following archive: http://download.hiveos.farm/asic/repo/fw/Antmines9k-s9se-st15-st17-installer.zip.

https://preview.redd.it/jge60cb79id41.jpg?width=1749&format=pjpg&auto=webp&s=9bed7fd0c00af661f98f5b1ba00ff20d1b699aff
  1. Scan the network using BTC_TOOLS and export the list to csv. From csv, copy the IP list and insert it in ips.ini. In case you don’t have a lot of devices, you can make this list manually. Or use bitmain ipreporter tool.
  2. Go to config.ini and check login and password for the ASIC’s SSH or web interface. If the password for the web interface was changed, the same would be for SSH. Set up FARM_HASH to connect to Hive or API, if necessary.

https://preview.redd.it/ar6sto289id41.jpg?width=1934&format=pjpg&auto=webp&s=2ee4c99dc7c12b30783b8577abc7eab3688f285a
  1. Download the firmware file (it has to have “Hiveon” in its title): http://download.hiveos.farm/asic/s17/
For S17 and S17 Pro, we offer the same firmware file. However, there are two options: “signed” and “nosigned” firmware. The signed firmware can be updated ONLY to another signed Hiveon firmware via ASIC’s web interface or BTC_TOOLS. Third-party or official firmware can’t be installed in this way. However, you can use the rm -rf /etc/bitmain-pub.pem command — send it to your ASICs via the Hive web. It will temporarily delete the certificate, but you can reboot your ASIC to bring it back. After this, you will be able to move to any firmware via the firmware update menu (in the Hive web). It will be possible to choose the firmware from the list or to use the URL.
The signed firmware can be downloaded here: http://download.hiveos.farm/asic/s17/Antminer-S17-S17pro-Hiveon-1.00-sign.tar.gz

https://preview.redd.it/ozudmbp89id41.jpg?width=1932&format=pjpg&auto=webp&s=971f7de606079ed210990675f36218d142813599

If the stock firmware of your ASIC is released before 1 July 2019

  1. Flash your devices with a file from the archive “remsigallbefore_2019–07–01.tar.gz”. This can be done via either ASIC’s web interface or BTC_TOOLS in case you have a lot of devices. You will see an error in status, but this is okay — it should be like this at the moment.
  2. Flash the devices with the firmware file. Again, this can be done via either ASIC’s web interface or BTC_TOOLS.
  3. Launch “3hashfarmforsigned.cmd” from the archive. The ASIC will get connected to the web.

Stock firmware released from July 2019 to December 2019

  1. Launch “1openssh.cmd” from the archive and wait for the script to be performed. The devices will be rebooted. After the reboot, wait for around 3 minutes.

https://preview.redd.it/u4js9wa99id41.jpg?width=1946&format=pjpg&auto=webp&s=d88ca022d77ca446c62d96f464829636bc73bf18
  1. Launch “2upgradereplace.cmd” from the archive and wait for the script to be performed.

https://preview.redd.it/2wv508x99id41.jpg?width=1931&format=pjpg&auto=webp&s=b5294cd32f1ba8fa686e8c5c43716ae8d1992f1f
  1. Flash the devices with the firmware file (via either ASIC’s web interface or BTC_TOOLS)

https://preview.redd.it/u3wfs3qa9id41.jpg?width=1960&format=pjpg&auto=webp&s=50882a291cf7b746366a3921cdf31695e8a6d3af
  1. Launch “3hashfarmforsigned.cmd” from the archive. The ASIC will get connected to the web.
Please be aware you could damage your hardware by applying new overclock to your Antminer S17 .
Video guide: https://www.youtube.com/watch?v=BT9bGGDld58&t=
submitted by mineshop to Bitcoin [link] [comments]

[Hiring] (Online) marketing, working from home, long term. You don't actually have to know any marketing - I train you remotely.

Read everything please. Apply exactly through the method described at the end!
This is for *th position, because the first few have already been filled with the help of this subreddit.
 
Requirements:
Salary:
Schedule:
  • 4 hours per day, 13:15 – 17:15 UTC, Monday to Thursday.
Other advantages:
  • The job is very secure. Being an efficient marketing company that actually offers value to customers, it's practically impossible to go bankrupt. We walk the walk, in a field pestered with scams.
  • If you have your own marketing capabilities that could be helpful to our clients, there's opportunity to earn more money by providing your own services through our platform.
  • Being extremely knowledgeable about cryptocurrencies and native in any of these languages would also open up the possibility for additional payments from certain contracts: Spanish, Portuguese, Arabic, Mandarin, Korean, Japanese.
  • I'll say it again: working from your own cozy home. No time lost in traffic. Long term.
How to apply:
  • Send a private message specifying that you're interested, and also rate how fitting are the schedule and the salary for you. Please also include your main Reddit username/s. Checking their history will help me assess your English level. If you're active on any of these networks, please send those usernames as well: Hacker News, Quora, Twitter, BitcoinTalk, Steemit, Lobsters, StackOverflow or any from its family, Product Hunt.
Thank you!
 
submitted by five-leaf_clover to Jobs4Bitcoins [link] [comments]

Survey: Investors Likely to Flow Back to Gold; China Blockchain Euphoria Fading

Survey: Investors Likely to Flow Back to Gold; China Blockchain Euphoria Fading
According to a recent Twitter survey, Bitcoin investors are likely to turn to gold as the cryptocurrency’s most recent hype fizzles out, leaving losses in its wake. The poll, conducted by Novem Gold, reveals the extent of the disillusionment among BTC enthusiasts as prices remain largely suppressed in H2 2019.
This slump, however, is most alarming because it closely follows the sharp gains the coin had enjoyed after optimistic comments from the Chinese head of state regarding blockchain in October. The speech, widely regarded as a watershed moment for the cryptocurrency, could prove pivotal for Bitcoin and the crypto world. China’s massive population can single-handedly send the coin’s Bull Run back on track.
In his speech, Chinese President Xi Jinping referred to blockchain as “ an important breakthrough.” Before the statement, the prevailing sentiment was that the Chinese government was anti-blockchain. The primary signal came after its September 2017 banning of initial coin offerings (ICOs). The speech was therefore interpreted as a green light indicating that China was willing to embrace cryptocurrency trading in all its aspects, which would push Bitcoin prices once more to the moon.
China, for many years, has been the epicenter of blockchain and cryptocurrency activity. Before a large number of investors in other parts of the world grew accustomed to Bitcoin, China had already established itself as a mining hub. The East Asian nation has significantly contributed in many ways to the rise of the digital currency sector over the years.
As an illustration, as of 2017 the country’s insatiable need for crypto assets was almost 90% of crypto’s total global trading volumes. Shockingly, just a few months into 2018, this demand dipped below the 1% mark. This decline in demand also followed Bitcoin’s most significant price dip, which saw it go from a high of $19,800 to a low of $6,200 each in less than two months.

China is Pro Blockchain

The excitement over the Xi Jinping speech was therefore palpable in October when he said that his country would “seize the opportunity” that blockchain offers in research, standardization, and development. The Chinese President is the first leader of a global economic giant to make such friendly remarks towards a technology that is maligned by some of his peers.
If the government embraces cryptocurrencies, Chinese Bitcoin bulls would return and push prices through the roof. Following the unexpected speech, the price of Bitcoin temporarily surged, adding 40% after rallying to a high of $9,526 on November 4th.
Unfortunately, the rise halted and a consistent correction happened, lowering the value of the token to a $6,524 mark on November 25th, a much lower price than before the Xi effect. Bitcoin has, however, recouped some of its losses over the last few days, but it is still trading at half the price in comparison to June 2019.
The Chinese, in contrast to many other countries, have many advantages when it comes to cryptocurrency awareness. They have, for instance, long been aware of the virtues of speculation into new asset types. They are also more aware of virtual currencies and have, over time, developed cautionary optimism for digital currency regulation.
Tencent QQ’s reward program, for example, paid out in Q coins and had more than 221.4 million active users by 2006. Consequently, some of the earliest BTC adopters were Chinese. Bitcoin’s popularity in China also increased with the East Asian country’s rise to the position of the second most powerful economy on earth.
China’s 12-th strategic economic plan, released in 2011, was one of many development aspects aimed at the reduction of the poverty rampant in the nation’s rural zones. As a result of the economic success of this plan, China’s emerging middle class burst onto the scene, increasing the country’s domestic consumption from a low of 4% in 2000 to a high of 68% in 2012.
The money that was left over after savings were taken care of was channeled into speculative investing. Since this aspect of making money is a big part of the investment culture of the Chinese, the country’s investors took a quick liking to Bitcoin.
The Chinese, however, were not purchasing the digital asset for its privacy attributes but rather for its investment appeal. Unlike many Bitcoin enthusiasts in the West who love the digital currency for its P2P features, the Chinese adopted BT for its Gold 2.0 features. Speculating in gold is an investment activity most Chinese are accustomed to.
This difference is the reason why, when the Silk Road closed down, the Chinese market for crypto was hardly affected. In the West, however, the closure of the online black-market platform adversely affected Bitcoin prices.

BTC was Gold 2.0 to China

The interest in BTC investment in China rose even further with the loosening of the government’s tight grip on financial markets. At the time, Beijing was in the process of developing diverse financial markets for the new elite to invest in, such as derivatives. A strengthening economy with friendly regulations was just what the Bitcoin investment frenzy required.
With the creation of BTC mining hardware in 2013, the participation of the Chinese as miners and investors soared. New 2016 to 2017 crypto regulations, however, brought the Chinese crypto trading market to its knees because they quashed the ability to speculate in Gold 2.0.
Despite the death of crypto speculative trading, the Chinese crypto community is still very vibrant despite the stringent regulations around it. This resilience is especially visible in the area of blockchain application.
Such innovation is what the Xi Jinping government is promising to support, not decentralized cryptocurrencies that make it difficult for governments to control money as they wish. Since the pro-blockchain October speech, there has been a cascade of activity in the Chinese blockchain scene.
The Chinese central bank is, for instance, readying itself to release its Digital Currency Electronic Payment System. The People’s Bank of China intends to replace the use of fiat with the DCEP blockchain-based payments solution. This move would make the country the first major world economy to embrace a native digital currency.
With the launch of the digital payment systems, China would find it much easier to extend the influence of its monetary policy to the rest of the world. While Beijing has no regard for “censorship-resistant” and permission-less digital currencies — as they endanger capital controls — it is building its centralized digital currency to supplant Bitcoin.
This effort is a true testament to Bitcoin’s significance and the Chinese government’s appreciation that the world’s monetary system is dependent on technological advancements. Unlike the West, China has harnessed the power of internet connectivity without losing its control over freedom of expression. The economic giant is now strategizing ways that it can harness the power of blockchain, albeit minus its decentralized aspects.
It could be that the Chinese government’s interest in the blockchain is part of the drive to end the age of the USD. This is an opportunity to move the country past its dependence on US-owned foundational technologies. According to Xi China, through blockchain, will “take the leading position … occupy the commanding heights of innovation, and gain new industrial advantages.”
China, however, is determined to make its cryptocurrency more acceptable to the international and domestic markets than Bitcoin has ever been. The second-largest economy has been amassing massive amounts of gold, which analysts say will back its native digital currency.
A gold-backed digital currency is acceptable in any part of the world and will significantly enhance Beijing’s de-dollarization policy. It is therefore expected that the county will maintain its leading gold mining and buying positions in 2020, which should add more fuel to the ongoing global gold rally.
https://preview.redd.it/nc1l1mlcyq741.png?width=1200&format=png&auto=webp&s=3ea7c308c3e2e226d8eced72adabefba70d49a80
submitted by y0ujin to NovemGold [link] [comments]

Considering investing some savings (8000 USD/5000 GBP) in bitcoin mining..

Okay, so I've recently discovered bitcoin and I think it sounds like it could be the next big thing, and I have some savings (about 8000 USD / 5000 GBP) that I am considering investing in bitcoin gear (live in England btw).. How many bitoins could I mine monthly if I invested that much? I have also heard about cloud solutions for mining bitcoins - is that worth looking into?
I think I'd be able to set up the gear and stuff get it mining on my own, if not I got a computer savvy friend who can help me out.
Cheers guys
submitted by yeahwellyousuck to BitcoinMining [link] [comments]

Burstcoin Is A Robust And Unique Cryptocurrency: Proof of Capacity (PoC) Ensures Decentralization, Energy Efficiency, And Low Barrier To Entry

http://www.cypherpunklabs.com/burstcoin-is-a-robust-and-unique-cryptocurrency-proof-of-capacity-poc-ensures-decentralization-energy-efficiency-and-low-barrier-to-entry/
Decentralization is perhaps the fundamental reason why Bitcoin has been successful. Since Bitcoin is decentralized, its network cannot be controlled by any government, corporation, or other centralized entity, and this is why Bitcoin still exists to this day rather than being shutdown a long time ago. Bitcoin achieves decentralization through its Proof of Work (PoW) algorithm, where miners around the world cryptographically hash transactions into blocks and receive block rewards for their efforts, and nodes constantly check to ensure that all confirmed transactions are following consensus rules.
The major caveat with PoW is it is energy intensive. This has especially become a problem due to the rapid rise in Bitcoin’s price long term, which has resulted in an arms race of sorts to amass the most hashing power in order to obtain the most mining profits. Indeed, the Bitcoin hash rate has risen orders of magnitude, from MH/s, to GH/s, to TH/s, to PH/s, and now up to its all-time high so far of 84 EH/s. This represents exponentially more computing resources and energy consumption.
This is a problem for two reasons. First off, there is a very high barrier to entry for new users to mine Bitcoin. It requires thousands of dollars of mining equipment to make any worthwhile profit from mining Bitcoin.
Secondly, Bitcoin mining consumes a massive amount of energy worldwide. It is estimated by Digiconomist that Bitcoin mining uses 73.12 TWh of energy annually, equivalent to the electricity consumption of the entire country of Austria, or 0.33% of total global electricity consumption. This releases nearly 35 Megatons of Carbon Dioxide annually, contributing to global warming, aside from other environmental damage caused by burning fossil fuels and manufacturing mining equipment. Digiconomist may be an overestimate of Bitcoin’s environmental impact, but it is somewhere in the ballpark.
Numerous alternative cryptocurrencies have tried to be environmentally friendly via using the Proof of Stake (PoS) algorithm, but this sacrifices decentralization, since all the voting rights end up concentrated into the hands of developers and major bag holders.
This is where Proof of Capacity (PoC), formerly called Proof of Space, comes in. Instead of using specialized Bitcoin mining equipment, PoC simply uses hard drive space to mine cryptocurrency. Burstcoin (BURST) is the #1 PoC cryptocurrency. Bitcoin HD (BHD) is another PoC cryptocurrency, but it has a highly centralized supply with 3.1 million out of 5 million total coins in the hands of the developers, so it is nonsensical to choose BHD considering that BURST has a highly decentralized supply. The problem with a centralized supply is it can cause a coin’s value to collapse long term due to developers dumping on the market.
In order to start mining BURST, a user simply allocates part of their hard drive, and this area of hard drive is plotted. Plotting is a 1-time hashing cycle where the hard drive is filled with cryptographic hashes via the Shabal cryptographic algorithm. The node also has to synchronize with the BURST blockchain before mining. Fortunately, the BURST blockchain is less than 9 GB, versus the Bitcoin blockchain which is nearly 240 GB.
Once plotting and synchronization is complete the user can begin mining. During each mining round the plot file is searched to find the correct cryptographic hash for the block, and when the correct hash is found the user receives a block reward. Essentially, the hashes in the plot file can be thought of as lottery tickets, and the bigger the size of the plot, meaning the more hard drive space dedicated to mining BURST, the more likely it is to find the correct hash.
Like with Bitcoin mining, users can join pools so that even if they have a small amount of hard drive space they can still earn BURST at a steady pace.
Since BURST’s PoC algorithm simply reads a hard drive versus the intense computational work of Bitcoin’s PoW, BURST mining uses a negligible amount of electricity. It is estimated that each BURST transaction consumes 0.0024 KWh of electricity, versus about 1,000 KWh used for each Bitcoin transaction.
Aside from being far more environmentally friendly, electricity costs are negligible for BURST miners, so BURST miners earn nearly 100% profit. This opens the door for users with any level of technology to profitably mine BURST, including personal computers and technically even cell phones. Compare this to Bitcoin where mining with even a powerful personal computer is impossible.
Ultimately, BURST’s energy efficiency makes the barrier to entry very low, a user simply needs to have hard drive space to mine BURST. This results in the BURST network being highly decentralized.
Notably, miners do not have to buy any special equipment to mine BURST, they just use spare hard drive space that was sitting unused, versus Bitcoin mining where specialized hardware that costs thousands of dollars is required. Bitcoin mining rigs often become obsolete with time, and also have no other use besides Bitcoin mining, whereas hard drive space used for BURST mining never becomes obsolete and can easily be freed up and used for storage by deleting the plot file.
In summary, BURST is one of the most unique and fundamentally robust cryptocurrencies due to its PoC algorithm, which ensures decentralization while simultaneously guaranteeing energy efficiency and a low barrier for miner entry.
submitted by turtlecane to burstcoin [link] [comments]

How to Mine Bitcoin in Your PC Without Adding Any ... DIY Bitcoin Mining: Hardware (part1) - YouTube Gekkoscience NewPac - USB BTC Mining (100 GH/s + on ... Best Bitcoin Mining Rigs in 2020  New 110 TH/s Antminer ... USB Bitcoin Miner - The Power of 1000's Computers - YouTube

Canaan’s AvalonMiner 1166 — released in October of 2019 — features a hashrate of 68 TH/s combined with a power usage of 3196 W, making it a high-efficiency miner for dealing in bitcoin. The ... Cloud Mining vs. Bitcoin Mining mit eigener Hardware. Nicht jeder hat die Möglichkeit einen BTC Miner bei sich zu Hause unter zu stellen. Sei es aus Platzgründen, zu hohen Strompreisen am Wohnort oder weil der Familie das laute Summen und die entstehende Wärme einfach nicht zuzumuten ist. Entsprechend gibt es viele Angebote, die es ermöglichen, Bitcoin Mining außerhalb der eigenen vier ... Miners today are not settling for any BTC mining hardware that provides less than 30 Th/s. Long story short, BTC mining hardware is a constantly changing industry. As an investor, you should constantly lookout for development in this market to enjoy steady profits. Below are some of the . Bitmain S17 and S17 Pro. S17 and S17 Pro are one of the best Bitcoin mining hardware available in the ... Herzlich Willkommen auf www.hardware-mining.de Wir verstehen uns als Infoportal für Mining Hardware. Wir durchforsten das Netz (insbesondere die englischsprachigen Seiten) nach den neusten Artikeln, Infos, Videos und Komponenten. Wir suchen nach authentischen Test- und Erfahrungsberichten im Internet – damit Du möglichst umfassend über die Neuigkeiten im Bereich Krypto-Mining-Hardware inf Bitcoin Mining Hardware Guide The best Bitcoin mining hardware has evolved dramatically since 2009. At first, miners used their central processing unit (CPU) to mine, but soon this wasn't fast enough and it bogged down the system resources of the host computer. Miners quickly moved on to using the graphical processing unit (GPU) in computer graphics cards because they were able to hash data 50 ...

[index] [20662] [31087] [16499] [31197] [5109] [15172] [35343] [26997] [2902] [42973]

How to Mine Bitcoin in Your PC Without Adding Any ...

New video every Tuesday! Today we are taking a look at the Gekkoscience NewPac USB miner. We'll check all the hardware you need for setting it up, discuss so... Bitcoin mining hardware comparison http://tiny.cc/AutoBTCgrowth You can Buy BTC Here: http://tiny.cc/jar Another great site to buy bitcoin with cash or credi... SUBSCRIBE FOR MORE HOW MUCH - http://shorturl.at/arBHL GekkoScience NewPac USB Miner - https://bit.ly/2RIQgdX GekkoScience 8 Port USB Hub - https://bit.ly/2x... BitCoin Mining Hardware Buyer's Guide ft. Riggit Mining Frame - Duration: 5:09. NCIX Tech Tips 67,046 views. 5:09. How to make an Arizona penny can alcohol stove - Duration: 19:40. ... Thank you for watching my Bitcoin Robot Review! complete list of auto-trading software http://www.youtube.com/watch?v=EgoYtsLuEOo The First Bitcoin Robot is ...

#